What you need from this kind of coating
Applied to stated build
Film thickness and curing requirements are followed to suit the chosen system.
Compatible system layers
Primers, body coats and finishes are checked to work together on the substrate.
Coverage on complex steel
Profiles and connections are coated with access and inspection properly planned.
Protective coating work that follows the stated system
Fire protective coatings are not a place for guesswork, because the coating has to do a defined job on a defined substrate. The correct system depends on the required fire-protection specification, the surface condition and the compatibility of the layers beneath and above it. With SprayTastic, we assess steelwork or other stated surfaces before application begins, looking at existing coatings, preparation needs and the primer requirements of the full system. That way, the job starts from the specification and the technical data, not from what happens to be quickest on site.
Applied to the right build across difficult details
Every SprayTastic project is carried out in line with manufacturer technical and safety data sheets, including the required film build, curing time and temperature conditions. We plan access, masking and controlled application so coating coverage reaches profiles, connections and awkward sections as intended. Inspection matters here, because fire coatings need the correct build and continuity across the surface. A finish that looks complete from a distance is not enough if the specified system has not actually been achieved.
Frequently asked questions
Are fire protective coatings the same on every substrate?
No. Fire protective coatings are specified around the substrate, the existing condition of the surface and the required fire-protection standard for the project. We assess the steelwork or other stated surface first so the primer, build and finish work as a compatible system.
How do you confirm the right film thickness?
We apply the coating in line with manufacturer technical and safety data, including the stated film build, curing time and temperature conditions. Inspection is part of the process, because fire coatings need the right coverage, not just a finish that looks complete from the ground.
Can you coat complex steel sections properly?
Yes, but they need careful application. Connections, profiles and awkward details can easily be undercoated if the job is rushed. We plan access, masking and application so the specified coverage is carried across the steelwork rather than only the easiest faces.